Utilitech 7115 03 Ventilation Fan Product Manual
Utilitech 7115 03 Ventilation Fan Product Manual
Blog Article
Utilitech 7115-03 Ventilation Fan Overview
The Utilitech 7115-03 is a high-performance ventilation fan designed to efficiently remove moisture, odors, and stale air from bathrooms and utility rooms. Its sleek, white design seamlessly integrates into most ceiling aesthetics, and it operates quietly, ensuring minimal disruption. Utilitech 7115 03 ventilation fan manual
Key Specifications:
Airflow Capacity: 100 CFM (Cubic Feet per Minute)
Sound Level: 1.5 Sones
Power Consumption: 30 Watts
Voltage: 120V, 60Hz
Duct Size: 4 inches
Weight: 8.2 lbs
Lighting: Integrated LED light with 1270 lumens output at 3000K color temperature
Energy Efficiency: ENERGY STAR certified device.report+5manualslib.com+5manualzz.com+5manualslib.com+3manualzz.com+3manualzz.com+3device.reportcopyright.com+2copyright.com+2copyright.com+2
Installation Instructions
Preparation:
Safety First: Before starting, ensure the power is turned off at the circuit breaker to prevent electrical hazards.
Tools Required: Phillips screwdriver, flathead screwdriver, utility knife, measuring tape, drill with bits, wire nuts, and a ladder.
Check Contents: Verify that all parts listed in the manual are present before beginning installation.manualslib.commanualslib.com
New Construction Installation:
Positioning: Place the fan housing between ceiling joists, ensuring it's level and perpendicular to the joists.
Mounting: Secure the fan housing using wood screws (not included) through the provided mounting tabs.
Duct Connection: Attach the 4-inch duct connector to the fan housing and connect the ductwork, ensuring a tight seal to prevent air leaks.
Electrical Wiring: Pull the house wiring through the wiring box cover hole. Using wire nuts, connect the 120V AC house wiring from the wall switch to the fan, following the wiring diagram provided in the manual.
Final Assembly: Attach the grille to the fan housing, ensuring it's securely in place.manualslib.com+1manualslib.com+1manualslib.com
Existing Construction Installation:
Access: Ensure there's accessible space above the ceiling, such as an attic or crawl space.
Positioning: Align the fan housing with the desired location between ceiling joists.
Mounting: Secure the fan housing using wood screws through the mounting tabs.
Duct Connection: Connect the 4-inch ductwork to the fan housing, ensuring a tight seal.
Electrical Wiring: Connect the house wiring to the fan as described in the new construction installation steps.
Final Assembly: Attach the grille to the fan housing.manualslib.com+1manualslib.com+1manualslib.com+1manualslib.com+1manualzz.com+1manualzz.com+1
Safety Information
Electrical Safety: Installation and electrical wiring must be performed by a qualified electrician in accordance with local codes.
Grounding: Ensure the fan is properly grounded to prevent electrical shocks.
Ventilation: Always vent the fan to the outdoors; do not vent into an attic or other enclosed spaces.
Moisture Protection: If installing over a tub or shower, ensure the fan is marked as suitable for such applications and is connected to a GFCI-protected circuit.
Avoid Hazardous Materials: Do not use the fan to exhaust hazardous or explosive materials and vapors.manualzz.com+1manualslib.com+1
Care and Maintenance
Regular Cleaning: Periodically remove the grille and clean it with a damp cloth to remove dust and debris.
Fan Blades: Use a vacuum cleaner with a brush attachment to gently clean the fan blades.
LED Light: If the LED light dims or flickers, check the connections and ensure the light module is securely attached.
Routine Inspections: Annually inspect the fan for any signs of wear or damage.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Fan doesn't operate | Power supply issue | Check circuit breaker and wiring connections. |
| Excessive noise | Loose fan housing or grille | Tighten all mounting screws and grille clips. |
| LED light not functioning | Loose or disconnected wiring | Inspect and secure all electrical connections. |
| Insufficient airflow | Blocked or improperly sized ductwork | Ensure duct is clear and appropriately sized. |
Warranty and Support
Warranty: The Utilitech 7115-03 comes with a limited warranty. Refer to the product manual for specific terms and conditions.
Customer Support: For assistance, contact customer service at 1-866-994-4148, available Monday to Thursday, 8 a.m. - 6 p.m. EST, and Friday, 8 a.m. - 5 p.m. EST.manualslib.com+1manualslib.com+1